How to repair the broken hole of PVC pipe?

PVCPVC

Small hacksaw, PVC pipe, abrasive paper, rag, bamboo joint and glue shall be prepared. First, use a small hacksaw to cut the broken hole of the PVC pipe, use sandpaper to polish the new pipe orifice, use a rag to wipe the polished part, apply special glue to the pipe orifice, and also apply glue to the bamboo joint, connect the port with the bamboo joint, and then apply appropriate amount of glue to the joint.

The specific operation is as follows:

1PVCFirst use a small hacksaw to cut the hole of the PVC pipe.

2Grind the new nozzle with sandpaper.

3Wipe the polished part with a rag.

4Apply special glue to the nozzle.

5Glue is also applied to the bamboo joint.

6Connect the port with the bamboo joint.

7Apply proper amount of glue on the joint.

Recommand products from LYDD:

PVC Resin SG-3

BILLIONS Rutile Titanium Dioxide BLR-601