How to clean the adhesive tape on the pvc?

Wipe the place with the traces of adhesive tape with the brush detergent of oil painting (turpentine) and the tissue paper with a bit of brush detergent, and the adhesive part will automatically adsorb on the tissue paper, and the adhesive will completely disappear. It's just as easy as dust is swept away by paper stained with water, and the price is relatively affordable. You can buy it at the art supplies store.

PVC

The PVC tape loses the binding water in the middle of the tape during the pasting process, and the adhesive is tight. You can use the principle of similar dissolution to continue to use new tape to slowly stick the old tape or you can also use gasoline or banana water directly. Of course, the effect of water use is the least ideal, and water use is also difficult to remove, sometimes even can not be removed.

If the area is small, consider using an eraser. You can also consider using expired hand and skin care products, and apply it on the adhesive surface to supplement the binding water in the adhesive tape to reduce its viscosity, so that the effect of removing traces will be much better.

Soap can be added with a little ammonia and turpentine mixture. It can remove a lot of dirt and make the glass surface more shiny. This method is only applicable to ceramic tiles, ceramics and glass materials.

10

You can use toothpaste to smear on the residual glue, and then scrub it with a rag for about 10 minutes.

pvc

Finally, touch some alcohol where the glue needs to be removed. If not, use Baijiu. Then use a hair dryer to clean the adhesive tape on the PVC thoroughly.

Recommand products from LYDD:

Erdos PVC RESIN SG-5

PASTE PVC RESIN PB1156